++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
		Title				: Near Williams Town to Oxford
		Author			: B. Halpin
		Date				: 27-Nov-02
		Date Last Modified	: n/a
		Version			: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Description
===========
This is an activity on the Modern England V3 full route.

You are taking a regional electric suburban set on a run from near Williams Town to Oxford.
You are to stop at all stations and you have to allow plenty of time at your stops to also load
any small parcels and packages on their way from local businesses to Oxford.
The Oxford-Williams Town service is on its way towards you so watch your signals.

The rolling stock required for this activity is the same as for "King's Cross to Manchester".

Installation:
=============
Before extracting the APK files, check you have the necessary rolling stock - see below.

Extract each APK file to your downloads folder, and either Run the APK from the
Start/Programs/Run.. box or double-click each APK file.
You may be asked if you want to over-write files - my advice is to say "No". Before getting
involved in these activities, do a check with ConBuilder to make sure you have all the
necessary rolling stock - see below.

If you haven't yet installed the TSUnpack fix, which corrects a problem with associating
the APK file type with TSUnpack, download "tsunpack.zip" (4Kb, 21-Aug-01) from Train-sim.com.

Requirements:
=============
Modern England Route V3 full install, modeng3f.zip, from either UKTrainsim.com or Train-sim.com.

Pendolino V1.1 trainset: virginCL39011.exe, from UKTrainsim.com
			(Note a capital L has been used in the filename for easier identification.
			It should be lower-case if you intend to search at UK Trainsim for this file).

	From www.train-sim.com:
		S302 loco by Christine Sweetnam: sclass25.zip
		NSW CityRail S-Set suburban electric trainset: ssetce12.zip
		NSW Countrylink Endeavour trainset: auendvr.zip
		NSW Countrylink Explorer trainset: explorer.zip
		V/Line VHGY wheat wagons: vhgy.zip

	From www.railpage.org.au/steam4me/trainsim/:
		Ten flat wagons with containers: AunswNQOX_Setup.exe
		NSW class 81 locos: Aunsw81_Setup.exe
		V/Line BS carriages: AU_vicBS_setup.exe

	From www.railpage.org.au/vr/msts/:
		VR B-class locos B60 and B74: Au_b_loco.exe
		VR B-class locos B72 and B83: Au_b_modern.exe
		VR B-class cab: Au_b_cab.exe
		VR GY wagon: Au_gy3626.exe
		VR J cement hopper: Au_j.exe
		VR VLX louvre van: Au_vlx.

Credits:
========
James Hunt for his Modern England route and special thanks for making the V3 full install
available from Train-sim.com.
Designers of the rolling stock used in this activity.

Disclaimer:
===========
Every effort has been made to ensure the installation of this file on your computer or its use will not cause any harm to your computer system. However, you install this file at your own risk and the author cannot accept any liability for any harm that may be caused to your computer as a result of you installing and using it.

Freeware:
===========
This file is distributed as freeware and is for personal use only. It may not be distributed or provided from any site for commercial purposes. Some files in this archive may be
copyright by other parties and these copyrights must be followed under international copyright law.

==========================================================================
			Bernard Halpin (webDotWiz on the Trainsim.com forums)
			www.webDotTrainSim.com
			mailto:info@webDotTrainSim.com
==========================================================================